φ5mm Ultra-micro Brushless Coreless Motor

New!

A compact 5mm brushless coreless motor featuring FPCB winding and AI-optimized design for high-speed precision applications.

Category:

Description

Product Overview

The φ5mm Ultra-micro Brushless Coreless Motor is engineered for applications requiring an extremely compact motor structure, high rotational speed, and reliable motion performance. With a diameter of just 5mm, this miniature brushless motor combines advanced FPCB winding technology with AI-optimized electromagnetic design to achieve an effective balance of performance, manufacturing feasibility, and cost efficiency.

Operating at a rated voltage of 6V, the motor delivers a no-load speed of up to 55,000 rpm and a nominal speed of 30,000 rpm. Its lightweight construction, weighing only 2.6g, makes it suitable for space-constrained equipment where weight reduction and high-speed operation are essential.

Developed by VAXOR, this ultra-micro motor is designed for integration into UAVs, wearable electronics, precision instruments, and other intelligent devices requiring compact and responsive drive components.

Key Product Features

  • Ultra-Compact 5mm Diameter: Miniature structure supports integration into devices with extremely limited installation space.

  • Brushless Coreless Design: Combines a compact motor architecture with high-speed rotational performance.

  • FPCB Winding Technology: Uses flexible printed circuit board winding technology to support compact electromagnetic construction and manufacturing consistency.

  • AI-Optimized Design: Applies AI-assisted design optimization to balance motor performance, cost, and manufacturability.

  • High Rotational Speed: Delivers up to 55,000 rpm no-load speed for high-speed motion applications.

  • Lightweight Construction: Weighs only 2.6g, helping reduce the overall weight of portable and miniature equipment.

  • Responsive Motion Output: Provides nominal torque of 0.40 mNm for compact motion systems.

  • Cost-Effective Manufacturing: Designed to balance performance requirements with practical production considerations.

Technical Specifications

The following table provides the main technical parameters of the φ5mm ultra-micro brushless coreless motor.

Parameter

Specification

Product Name

φ5mm Ultra-micro Brushless Coreless Motor

Model

G05P-VW00-QZ-1

Voltage

6 V

No-Load Speed

55,000 rpm

Nominal Speed

30,000 rpm

Nominal Torque

0.40 mNm

Stalling Torque

0.80 mNm

Torque Constant

0.65 mNm/A

Weight

2.6 g

Note: The specifications above are based on the supplied product data. Please contact the manufacturer for additional dimensional drawings, electrical characteristics, and operating conditions.

FPCB Winding Technology and Design Optimization

FPCB winding technology is an important part of this motor's compact electromagnetic design. By integrating flexible printed circuit board technology into the winding structure, the motor is developed to accommodate miniature dimensions while maintaining practical manufacturing requirements.

Combined with AI-optimized design, the motor achieves a balance between electromagnetic performance, structural arrangement, production feasibility, and cost control.

This engineering approach makes the φ5mm Ultra-micro Brushless Coreless Motor suitable for product developers seeking miniature drive components for next-generation intelligent devices.

Typical Applications

With its 5mm diameter, lightweight structure, and high-speed performance, this ultra-micro motor can be considered for various compact equipment and precision motion applications.

  • UAVs and Micro Drones: Suitable for miniature drive systems where compact dimensions and low weight are important.

  • Wearable Electronics: Supports the development of lightweight and space-efficient wearable devices.

  • Robotics: Can be integrated into miniature robotic mechanisms and compact motion assemblies.

  • Medical Devices: Suitable for applications requiring small-scale electromagnetic drive components, subject to system-specific validation.

  • Precision Instruments: Provides high-speed rotational output for compact precision equipment.

  • Intelligent Equipment: Supports miniature motion mechanisms in next-generation intelligent products.

  • Portable Electronic Devices: Offers a lightweight motor option for products with limited internal installation space.

Performance Advantages for Miniature Motion Systems

For miniature equipment, motor selection involves more than reducing physical dimensions. Engineers must also consider rotational speed, torque output, weight, electrical characteristics, and manufacturing consistency.

The φ5mm motor addresses these requirements through several design characteristics:

High-Speed Operation

With a no-load speed of 55,000 rpm and nominal speed of 30,000 rpm, the motor provides high rotational speed for compact mechanisms requiring rapid motion.

Compact and Lightweight Integration

The 5mm motor diameter and 2.6g weight help reduce the space and weight requirements of integrated drive systems.

Practical Torque Output

The nominal torque of 0.40 mNm and stalling torque of 0.80 mNm provide reference values for evaluating motor suitability in miniature motion applications.

Manufacturing-Oriented Engineering

The combination of FPCB winding and AI-optimized design considers not only motor performance but also production feasibility and cost efficiency.

Manufacturing and R&D Capabilities

VAXOR was founded in 2024 and is headquartered in Suzhou, China. The company focuses on developing micro joint actuators and ultra-micro coreless motors for robotics, medical devices, precision instruments, and intelligent equipment.

Its technical approach integrates axial-flux motor technology, PCB/FPCB winding, optimized electromagnetic design, and miniature reduction mechanisms to develop compact motion solutions with high torque density, precise control, fast response, and high efficiency.

VAXOR is supported by a multidisciplinary team with expertise in:

  • Motor design and electromagnetic engineering

  • Precision manufacturing and structural design

  • Robotics control and intelligent equipment

  • Prototype development and engineering validation

  • Pilot production and batch manufacturing

The team combines technical backgrounds from universities and industrial R&D environments in China and overseas, with a focus on translating motor technology into scalable manufacturing solutions.

VAXOR products have been supplied or sampled to robotics companies, technology enterprises, and research institutions worldwide.

Why Choose VAXOR?

VAXOR focuses on miniature drive technology and provides engineering-oriented motor solutions for compact intelligent equipment.

Key advantages include:

  • Specialized Product Focus: Dedicated to micro joint actuators and ultra-micro coreless motors.

  • Multidisciplinary R&D: Expertise spanning motor engineering, robotics control, precision manufacturing, and structural design.

  • Integrated Technical Approach: Combines axial-flux technology, FPCB winding, electromagnetic optimization, and miniature reduction mechanisms.

  • Engineering Implementation: Experience covering prototype validation, pilot production, and batch delivery.

  • Application-Oriented Development: Solutions designed for robotics, medical devices, precision instruments, and intelligent terminals.

  • Global Technical Collaboration: Products supplied or sampled to international technology companies and research institutions.

With a mission to become a global benchmark in micro-drive technology, VAXOR continues to develop compact, high-performance motor solutions for increasingly demanding applications.

OEM, ODM and Project Cooperation

For engineering teams and equipment manufacturers developing miniature drive systems, selecting a suitable motor requires consideration of installation dimensions, voltage, rotational speed, torque, weight, and application conditions.

When inquiring about the φ5mm Ultra-micro Brushless Coreless Motor, buyers can provide the following information:

  • Required motor model or reference specification

  • Operating voltage and electrical requirements

  • Target rotational speed and torque

  • Available installation space

  • Equipment type and application environment

  • Expected purchasing quantity

  • Prototype or mass-production requirements

The VAXOR team can discuss technical requirements, motor integration, prototype validation, and potential customization according to project needs.

Request a Quote for φ5mm Ultra-micro Brushless Coreless Motor

The φ5mm Ultra-micro Brushless Coreless Motor offers a compact 5mm form factor, high rotational speed, lightweight construction, and FPCB-based winding technology for miniature motion applications.

Whether you are developing UAV components, wearable electronics, robotic mechanisms, or precision intelligent equipment, this motor provides a practical option for compact drive integration.

Contact VAXOR to request pricing, technical documentation, and engineering support for your miniature motor projects.

Choose the φ5mm Ultra-micro Brushless Coreless Motor for compact, high-speed, and manufacturing-oriented motion solutions.

Reviews

There are no reviews yet.

Be the first to review “φ5mm Ultra-micro Brushless Coreless Motor”

Your email address will not be published. Required fields are marked *